HG-Abrasive 75-450 cutting and grinding wheel forming machine is based on the digesion and absorption of domestice and foreign advanced technologh and experience,through unremitting efforts, innovation, the launch of the latest machine,automatic multi-position fiber reinforced resin cutting & grinding wheel press machine.

From the aspects of functionality, configuration and appearance of the machine made a large update, adapt to a wider range,can better meet the customer needs, it is your right choice.

The machine adopts electric cylinder propulsion, can make the mold more stable and high speed operation, but also adopts electric cylinder scraper, compared with the traditional CAM, pull rod and other micro lifting methods, electric cylinder scraper has faster speed and stability, can be set according to the customer's different micro lifting effect. The equipment is equipped with automatic sucking, automatic putting net, automatic putting trademark hole ring, and various intelligent detection methods, which saves a lot of labor and improves the output, and the output can reach about 1300 pieces per hour.

Technical Data

1. Hydraulic machine 200T—500T

1.1Maximum nominal force of hydraulic machine2500K.N

1.2 When the machine base is placed with the ground, the rubber pad is used, and there is no need for fixing bolts.

1.3. The upward and downward speed of the hydraulic machine can be adjusted according to the different products. The vibration of the hydraulic machine is very small and will not affect the products.

1.4. The power motor of the press hydraulic station is 7.5KW. Use 46# gb anti-wear hydraulic oil.

2. Main configuration and product specifications

2.1 The machine has a total of 48 stations.

2.2 The product specifications are 115-125 resin cutting wheels.

2.3 Automatic feeding adopts hopper feeding, direct shock feeding, container measurement, the accuracy (to ensure that the sand is granular without agglomeration) single feeding can be controlled within the standard tolerance of ±1 g (volume feeding).

2.4. Automatically place the trademark and the hole ring. The trademark is absorbed by a vacuum sucker, the hole ring adopts a conveyor belt, and a strong magnetic pick-up the mould cavity is picked up is used to place the mold cavity (no stamping burrs are required for trademarks and holes).

2.5. Automatically place the mesh, and the mesh is placed in the cavity with adhesive tape (the net cloth is loose).

3. Electrical control part

3.1 The operation of the machine is controlled by PLC and the parameters are adjusted by touch screen.

3.2 The carrying manipulator translation with stepper motor, machine cylinder and pneumatic solenoid valve with AirTac;

4.Capacity: in the case of raw materials are up to standard, the output is 1100-1200/ hour. (This should also be different according to the process requirements of each production enterprise)